New Looks Entry into the Taiwanese Apparel Market

Future Trend in Healthcare Essay

Future Trend in Healthcare Essay Future Trend in Healthcare Essay Running Head: Future Trends in Health Care Future Trends in Health Care The face to face method of interaction will always be the basis of physician-patient relationship. The effect of technology within the field of healthcare has impacted the healthcare delivery system in a revolutionary manner. A health care delivery system is that combination of insurance companies, employer groups, providers of care and government agencies that work together to provide health. The advancement rate of technology in this day and age in the United States is so swift it is being observed by patients and providers from a far and as it emerges. The evolution of communication through the use of electronics has taken the healthcare industry by storm. E-Mail, telephone use, and the internet have pushed communication between patient and physician to re-imagine and alter their thinking in regards to making healthcare provisions. Home monitoring systems, personal health records, and on-line support groups is making it possible for society to take charge of their health (Cen ter for Practice Improvement and Innovation, 2008). Forms of communicating through electronics, former and recent, will be reviewed as a delivery method for patient information. The ramifications of distance, technology systems used to transport files, and future and present use of these systems will be analyzed. Telephones, for a long time, have been the main source of communication between facilities, physicians, practices and patients. The telephone has been the dominant force for conveying important information and at times still holds that title. Its uses stretch from confirming appointments to the discussion of the findings from physical exams. It has even been considered the lifeline of pharmacy and physician communication. The telephone is also one of the key communication devices for employees to communicate internally and with insurance companies. With patients who are chronically ill and have established a relationship with the physician, the telephone can serve as an off ice visit (Center for Practice Improvement and Innovation, 2008). In other words, patients who do not possess the ability to walk into an office for a routine visit due to illness (chronic) have the ability to now visit their physician by phone contact. Patient care though electronic means amplify effectiveness, production and keeps operational costs low. The increase in the aspiration and readiness to make use of technological advancements by physicians is the inspiration and necessity for more patients to acquire such communication devices. The use of online communicating, such as e-mail or internet, produces results of lower administrative costs, less usage of landlines, and attracts new patients. Online communicating gives a patient the advantage to review information as much as needed to obtain a better understanding of the documents. E-mailing transcripts in comparison to taking them by phone, is considered far less distracting, pricey, practically documents itself and can be completed in the physician’s spare time. The use of internet communication results in patient retention and patient satisfaction (Center for Practice Improvement and Innovation, 2008). These two results add significance to the quality of care of a patient and opens doors to the receipt of new patients to the facility or practice. The use of a secured messaging system is by far the safest and most reliable method for the communication of sensitive or rather secretive information. A secured site for medical information is to protect unauthorized users from access. The most common protection for electronic information is installing an encryption system (Center for Practice Improvement and Innovation, 2008). It also allows the practice, facility or physician to remain in compliance with HIPAA regulations. The Acronym for Health Insurance Portability and Accountability Act, HIPAA provides national standards to

Laplace Transforms Coursework Example | Topics and Well Written Essays - 500 words

Laplace Transforms - Coursework Example Many Engineering applications which are not solvable using ordinary differential equations can be solved by Laplace transforms provided the Laplace transforms exist. The Laplace transforms seek the exponential order to exist. Many real life Engineering applications can be brought into the purview of exponential order and also it insists the derivative to exist and piecewise continuity must be present. The foremost advantage of Laplace transforms is it converts difficult differential and integral equations to simple algebraic equations which is easily solvable rather than the original differential/integral equations. It can be used in electrical circuit theory to know the original current passing through a circuit for a given electromotive force, inductance, resistance and capacitance. It is used in vibration theory because it resolves function into moments. It is used to find the bending moment of any RC column in Civil Engineering applications. In circuit theory it is more used. In harmonic oscillators, optical devices also Laplace transforms are used. In spring vibrations relating to Mechanical Engineering problems it is much used. In chemical reactions involving differential equations, Laplace transforms are used. Because of the nature of converting from time domain to frequency domain it is used in Biological (genetical) and stochastic applications. It is widely used in Engineering since many Engineering problems involve the complex differential and the integral equations.

Quantative reasoning Speech or Presentation Example | Topics and Well Written Essays - 500 words

Quantative reasoning - Speech or Presentation Example This implies that half of the people of this group have a manual dexterity of over 79.5 and the other half of the employees have a manual dexterity of over 79.5. To calculate the standard deviation of Group A, firstly the difference of the values and the mean is calculated, after which these numbers are squared. The total of the squares are then calculated and then divided by the number of values to provide the Variance. The last step is to take the square root of the variance. This provides the standard deviation for the group. The Standard deviation along with the Mean, give the image of Group A to be a better option, whereas combining the Standard deviation and the median, Group B proves to be a better option. Thus these measures alone cannot be considered to make the choice. Other measures are to be kept in mind as well before making a decision by the company. Thus more data and analysis is required for this decision. 2. From the information that has been provided the Mean has been calculated to be 7.55 calls. For the mode however there are two possible answers, 4 as well as 8. This is because they are repeated the most number of times. However, 8 will be chosen as the Mode in this case as it is closer to the mean that has been calculated. The Median for in this case has been calculated to be 7. These numbers are quite accurate and are as expected. These values are all quite accurate, however the median can be considered as the most accurate measure. The Standard Deviation in this case has been calculated as 4.421255. This implies that the number of calls can be 4.421255 Â ­above or below the calculated mean. This deviation is considered to be good as the deviation is not very high and allows a clearer view of the number of calls the company can

Course of Action Statement and Sketch Coursework

Course of Action Statement and Sketch - Coursework Example In accordance with Field Manual (FM) 3-21-31 (2003), â€Å"Decisive operations at any echelon (accomplished by a designated main effort) directly achieve the purpose of the mission of the higher headquarters.   At the SBCT level, there is only one decisive operation†.   By that definition, once the attack by Ahurastan forces occurs, EUCOM will automatically switch to Phase 2, which is Seize the Initiative.   With 4ID aviation assets disrupting enemy forces, it is hoped that the SBCT will be able to accomplish its main decisive operation as established by the 4ID CG, to designate two routes through AO for passage and to close said routes on/order.   These routes have been designated on the map as the primary and alternate route.   AA1 has been preliminary chosen as the primary route because of the dam adjacent to AA2.   If the Commandos choose to sabotage the dam, road traffic would be cut off, especially considering there is no improved bridge on AA2. Because the 4 ID battle plans are not finalized as of this date, it is impossible to determine whether the division CG will require simultaneous shaping and decisive operations.   Therefore this COS will assume they will be separate entities.    In order to maintain the Decisive Operations as described above, SBCT fires teams will be established at integral areas along both designated routes, as well attempting to neutralize all enemy assets in the AO.   Engineer assets should be mobilized closer to AA2 with a fires team.... If the Commandos choose to sabotage the dam, road traffic would be cut off, especially considering there is no improved bridge on AA2. IV. Shaping operations Because the 4ID battle plans are not finalized as of this date, it is impossible to determine whether the division CG will require simultaneous shaping and decisive operations. Therefore this COS will assume they will be separate entities. In order to maintain the Decisive Operations as described above, SBCT fires teams will be established at integral areas along both designated routes, as well attempting to neutralize all enemy assets in the AO. As it slow to move them, Engineer assets should be mobilized closer to AA2 with a fires team in order to keep that route operational in case AA1 is overrun. If the area is not as heavily attacked as is predicted, the engineers can work on preparing a possible bridge over the ARAKS, even temporary will work in the event of an emergency. V. Sustaining operations By the FM, sustainment ope rations are conducted throughout the area of operations, so it would probably be best to break the sustainment down into the levels as discussed in Chapter 1 of the FM. The Op Order states the SBCT should be prepared to accomplish this mission for â€Å"several weeks†, until the Task Force is fully deployed and operational, a large order considering support is â€Å"austere†. V.1 Movement Military Police will provide movement control along the designated routes, especially once enemy forces have been neutralized. This will be one shortfall for the SBCT, as the MP’s will be stretched extremely thin along some 120 kilometers of roadway. If there are any MP assets available, perhaps the 4ID CG can attach them to the Combat Team, to augment our own forces. V.2 Security (Including rear

Approaches to Development Communication

Approaches to Development Communication Introduction Development Communication is based on one-way flow of information for the purpose of disseminating information and messages to induce change. Its main intentions can be divided into two different types of applications: (1) communication to inform and (2) communication to persuade. Development Communication uses method of investigation in which a problem is first identified and observations, experiments, or other relevant data are then used to construct or test hypotheses that solves it. ________________________________________________________________________________________ Diffusion of Innovation Approach This concept is given by Everette M Rogers. Mass communication is a two-step flow process. It develops favourable attitudes through the mass media and leads to the adaptation of inter-personal channels, especially opinion leaders. Modernization is taken as a process of diffusion, where individuals move from a traditional way of life to a different, more technically developed way of life. This approach is concerned with the process of diffusion and adoption of innovation in a more systematic and planned way. This diffusion model is a vertical or one-way perspective on communication, and that active involvement in the process of the communication itself will accelerate development. This approach is based on the need assessment of the target groups and helping people to fulfil their needs by adoption of innovation. Communication has to play the role of facilitator in disseminating innovations to the target groups. Development is basically acceptance of change and innovations –ideas, practice and technologies. Facilitating diffusion of innovations is an essential aspect of the development. All innovations need not be new to all people. An innovation refers to an idea perceived as new by an individual. Diffusion is a process by which an innovation spreads from its source of creation to the users or adopters. The essence of the diffusion process is the human interaction, in which one person communicates a new idea to another person. There are four elements in any analysis of the diffusion process: Innovation (any idea considered new by recipient) Communication (the individual to another through certain channels). Social system (among members of society) Time taken (from the stage of innovation to the stage of adoption). Stages in the adoption process: Five distinct stages have been identified by the scholars: Awareness stage – there is broad exposure of the innovation, but the individual does not have sufficient information. He is yet to get motivated either to seek further information or to act upon it or know how it functions (Knowledge). Interest stage – individual shows interest in the new idea, makes an effort to seek additional information. However, the person is still undecided about its application. Person forms a favourable/unfavourable attitude towards innovation (Persuasion). Evaluation stage – The individual mentally applies the innovation to one’s own situation, and then decides whether to try it or not. Person engages in activities that lead to a choice to accept / unaccept the innovation (Decision). Trial stage – individual uses the innovations on a pilot stage (limited scale) to decide about its utility and relevance to one’s own situation. Observation is that people will not adopt an innovation without trying (Implementation). Adoption stage – It is the process through which the individual arrives at the decision to adopt or reject the innovation from the time they first became aware of it. Individual decides to continue the use of innovation. Adoption implies sustained or continuous use (Confirmation). Information Sources and their Relevance at Various Stages of Adoption: While personal communication is face to face contact, whereas impersonal is mediated through mass communication channels – (mass media) Print, Radio, TV and film are most effective in providing various options and alternative choices. They are effective in drawing the attention of the individuals. Hence, the mass communication channels are found to be most important in the evaluation stage of the adoption sources. Inter-personal communication through extension workers, friends and family members can influence behaviour and facilitate transfer of ideas. The mass communication channels seldom effect decisions directly although they influence indirectly. Factors affecting the Rate of Adoption of Innovation: While some of the factors that stimulate and facilitate quick diffusion of innovation are transfer of technologies. Well informed opinion leaders communicate their approval/ disapproval of an innovation based on the innovators experiences to the rest of the social system. Majority respond by rapidly adopting it. The analysis suggests a small point—whether or not opinion leaders vouch for it but some others inhibit adoption: Compatibility- the degree to which an innovation was consistent with existing values and past experiences. Cultural incompatibility – certain social systems do not encourage adoption of innovations. Individuals in such a system are very slow and rigid in accepting new ideas, practices and technologies. The vegetarians show marked resistance in accepting non-vegetarian diet because of change in food habits. New crop varieties which give higher yields and better incomes, have been rejected on the ground of taste, fear of ill-health and unacceptability as food. Thus cultural incompatibility and mismatch with the existing social system are considered to be very strong inhibitors. Classification of adopters: It is based on the rate of adoption and the time lag between initial exposures to final adoption. Innovativeness is defined as the degree to which individual is relatively earlier in adopting new ideas than other members of a system. The personal characteristics and interaction of these groups illuminates the diffusion effect. Diffusion researchers have classified adopters into five categories: Venturesome innovators: These are the most eager members of the society to try new ideas and adopt new practices. They are enterprising and willing to take risks. Usually they belong to the cosmopolite category. Early adopters – These are usually younger, had a higher social status, more favourable financial status, engaged in more specialized operations and were equipped with greater mental abilities. They used the data provided by the innovators in implementation and confirmation of the innovation to make their own adoption decision. If the opinion leaders observe that the innovation has been effective for the innovators, then they will encourage others to adopt. This group earns respect for its judicious well- informed decision making and hence this group is from where most opinion leaders reside. These belong to the local system; they follow the venturesome. These used more mass media. Early majority They become the reference groups for the subsequent late adopters, which constitute the early majority. Late majority – Much of the social system does not have the inclination or capability to acquire information of the most recent innovations. So they trust the opinion leaders, since adoption of opinion leader is a good indicator that innovation is going to be adopted by many also and other members will be encouraged to adopt. Laggards – The laggards are very slow in adoption. They are rigid, traditional, isolate in their social system, hard to be convinced, stick to the old methods and resist change. If they are traditional, they are suspicious of innovations and often interact with others who also have traditional values. If they are isolates, their lack of social interaction decreases their awareness of an innovation’s demonstrated benefits. It takes much longer than average for laggards to adopt innovations. Potential adopters, uncertain about innovation go through a stepwise social process. Well informed opinion leaders communicate their approval-disapproval of an innovation, based on the innovators experiences. Some respond by rapidly adopting. We can judge the importance of opinion leaders. Large subsection of the social system follows the trusted opinion leaders. Those who do not adopt lose status or economic viability. Adoption becomes necessity as implementation results in social, economic benefit and this contextual pressure motivates adoption. Conclusion Diffusion of innovation research established the importance of communication, new ideas and their practice is a crucial component of the modernization process. People change attitudes of those whom they talk to, work with, or interact with. People will adopt an innovation if they believe that it enhances their utility; it determines the extent of change in their normal functioning increases compatibility with habits and values, and has cost-benefit analysis. ________________________________________________________________________________ Localised Approach This approach advocates that information transmitted through media must be locally and functionally relevant to the audience is called localised approach. The development programmes must be local to meet the local needs which vary widely in different regions and sub-regions in a large country like India due to the diversity of climate, cultures and languages. Localised approach would enable communicators to design messages which will be relevant in terms of utility, timeliness, applicability, specificity, etc. The relationship between communication and development can be broadly divided into two types: Macro society level studies (by Wilbur Schramm, Daniel Lerner etc.) gave direct support to the view that a modern mass media system is an important requirement for development. Micro societal level studies argue that information of certain kind generates appetite for new things and new ways of doing things, which ultimately sets the process of development. Benefits of localised approach Localised approach would enable the communicators to design messages which will be relevant in terms of utility, timeliness, applicability, specificity etc. The approach would tailor message for local conditions. The approach can overcome infrastructural difficulties. Such an approach will allow greater involvement and participation of the audience in the communication process. As the needs of people vary widely in different regions and sub-regions. In a large developing country like India, there is diversity of cultures and languages Dos and Don’ts of localized approach: There should be proper need-assessment of the local population. The socio-economic condition of the local people should be kept in mind before designing the message. The geographical and political conditions of a local area bear a lot of significance for message designing and delivery. Preferences should be given to local media and local resource persons for the execution of communication tasks. Conclusion The localised media approach helps to plan messages specially designed for various local groups. This facilitates two way communications by allowing greater involvement and participation of the audience in the communication process. In case of any problem at the local level, the solution is found there and then. Naturally for particular specific situation the solution would also be specific. There cannot be a general approach. This localised approach generally yields a positive result. ________________________________________________________________________________ Magic Multiplier Mass Media is called the magic multiplier as it can multiply the messages and reach a number of people very fast and at one go. Its output does have great potential and modernizing effect. It is their content that is the key to use in development. Mass media are important in spreading awareness of new possibilities and practices, but at the stage where decisions are being made about whether to adopt or not to adopt; personal communication is far more likely to be influential. Therefore, the general conclusion of this line of thought is that mass communication is less likely than personal influence to have a direct effect on social behaviour Wilbur Schramm (1964), in his book ‘Mass Media and National Development’ which was produced for UNESCO became almost a blueprint (programme of action) for development communication. Schramm stated that content is the key to their use in development. Social change of great magnitude can be accomplished when people informed, persuaded, educated. Information must flow at all levels so that they can participate in the acts and decisions of nation building. He also argued that each person would have requirement of information of the work he would undertake, and there being millions of workers would require information of various types. The conventional channel of communication would never be able to meet this demand. Therefore, modern communication technologies would be of great use to meet this demand by multiplying the messages and reaching each and every worker simultaneously. Arguments for Magic Multiplier We need magic multiplier for the following reasons: For social change of great magnitude, people must be informed, educated, motivated and persuaded. Information must flow, not only to them but also from them, so that their needs can be known and they might participate in the acts and decisions of nation-building. As the required amount of information and learning is vast so the targeted population. Work should be organised and skills should be learnt at all levels of society for better utilization of the resources of society. The available channels of communication like inter-personal, group-communication, traditional media are incapable to undertake this task, as this will require a lot of time and resources. For a developing country, its difficult to gather a large pool of resources and wait for such a long time. Mass media with its magical reach can do this job in less time and resources. Analysis of magic multiplier The audit found that the mass media succeeded in reaching a vast majority of population in less time and resources. Mass media as a magic multiplier did a commendable job in spreading awareness but it could not give expected results in persuading and educating the targeted population. It was found that persuasion, motivation and education for/on something is best achieved by close interactions which is possible in inter-personal, group-communications etc. Conclusion Use of latest technologies is required to supply large amounts of information to large number of people at one time and in modern formats. A lot of feedback is required when one uses communication for development; it should never be one way traffic. The users should be able to give feedback to the implementers, as success/failure of the programme could be judged.

Technology is a Friend of Humankind Essay -- Argumentative Persuasive

Technology is a Friend of Humankind Technology is important in our world today. Terry Tempest William’s â€Å"The Clan of One-breasted Women† is about women having breast cancer because of bomb testing from 1952- 1961 in Utah. In this case technology has a negative effect on the human race. On the other hand, â€Å"The Technology of Medicine† by Lewis Thomas is about money and the technology of medicine. There are three different levels of technology in medicine according to Thomas and they are â€Å"nontechnology,† â€Å"halfway technology† (582), and â€Å"technology of modern medicine† (583). It is obvious that technology benefits humankind with cures for diseases and prevention of sickness. Without technology, medicine would not be as advanced and there would not be as many medical procedures as there are today. By using technology, doctors have found out how to prevent certain diseases or viruses by immunizations. In fact, the human race needs to have technology to advan ce the medical field, as disclosed in Richard Selzer’s â€Å"Sarcophagus† about surgery, from the doctor’s point of view, showing all of the technology he uses during procedure. All these essays have examples on how technology benefits human kind. Therefore, technology is a friend of humankind, when used with restrictions, because it has made improvements in medicine and has proved its usefulness in hospitals. There is no doubt that technology has to be used with restrictions because of what has happened with the bomb testing in Utah. Between the 1950s and 1960s the government decided to test nuclear bombs in a deserted area in Utah. Because of testing this technology out it has cost a whole clan of women to be diagnosed with breast cancer. As Williams puts it, â€Å"Children grow... ...es. Though technology has gotten humanity far, there is still a lot more information to be discovered. Without medical technology, many people would have died of diseases because of inadequate treatment. Therefore, technology has been a friend of humankind and will continue to be even a greater friend in the future. Works Cited Klass, Perri. â€Å"Macho†. The McGraw Hill Reader. 8th ed. Ed. Gilbert H. Muller. New York: McGraw Hill, 2003. 577-580. Selzer, Richard. â€Å"Sarcophagus†. The McGraw Hill Reader. 8th ed. Ed. Gilbert H. Muller. New York: McGraw Hill, 2003. 564-570. Thomas, Lewis. â€Å"The Technology of Medicine†. The McGraw Hill Reader. 8th ed. Ed. Gilbert H. Muller. New York: McGraw Hill, 2003. 581-585. Willams, Terry Tempest. â€Å"The Clan of One-breasted Women†. The McGraw Hill Reader. 8th ed. Ed. Gilbert H. Muller. New York: McGraw Hill, 2003. 598-604.

Investor Ratio Analysis

Investor Ratios There are various ratios that are designed to help investors who hold shares in a company to assess the returns on their investment. These are: Dividend per Share The dividend per share ratio relates the dividends pertaining to an accounting period to the amount of shares in issue during the period. The ratio is given as follows: Dividend per share = Dividends pertaining to a period Number of shares in issue The ratio provides an indication of the cash return a shareholder receives from holding shares in a company.Although it is a useful measure, it must be remembered that the dividend received will usually only represent a partial measure of the return to an investor. Dividends are usually only a portion of the earnings generated by the firm and available to shareholders. A business may decide to plough back some of its earnings back into the business in order to achieve future growth. These ploughed back profits belong to the shareholders and should in principle inc rease the value of the shares. Thus w h e n assessing the total return to an investor we must look at both the dividends received and any movement in the share price.The dividend per share for Alexis Ltd is given as follows: Page 1 of 5 Dividends per share can vary considerably between companies. A number of factors will influence the amount that a company is willing or able to issue in the form of dividends to shareholders. These factors include: †¢ †¢ †¢ †¢ The profit available for distribution to investors The future expenditure commitments of the company The expectations of shareholders concerning the level of dividend payment The cash available for dividend distributionComparing the dividends per share between companies is not always useful as there may be differences between the nominal value of the shares issued. It may be more useful to monitor the trend in dividends per share over a period of time. Dividend Yield Ratio This ratio relates the cash return from a share to its current market value and is given as follows: Dividend Yield Ratio = Dividend per Share Market Value of a Share * 100 1 The ratio for Alexis pic is given as follows: Page 2 of 5 In essence this ratio measures the real rate of return on a share.Investors can compare the returns from a company's shares to the returns that could be earned by investing either in another company or by investing in another form of investment. Dividend Cover Dividend cover (for ordinary shares) looks at how many time a firm's profits (after interest, lax and preference dividends) cover the ordinary dividends. Dividend Cover = Profit after interest, tax and Pref Share Dividends Ordinary Share Dividends For Alexis plc this ratio is calculated as follows: Interpretation: Alexis plc profits covers ordinary dividends 3. 96times.Dividend cover is calculated using the profit after interest and tax figure because banks, government and preference shareholders have a preferential claim on the pro fits of the firm. This ratio is of particular interest to ordinary shareholders. Earnings per share The earnings per share relate’s the earnings generated by the company during a period and available to shareholders to the number or snares in issue. For ordinary shareholders the amount available will be net profit after interest, tax and preference dividends because banks, the government and preference shareholders have a preferential claim on the profits of the firm.Page 3 of 5 Earnings per share = Earnings available to ordinary shareholders Number of ordinary- shares in issue For Alexis plc this ratio is calculated as follows: The EPS is regarded by many investment analysts as a fundamental measure of share performance. Tracking the EPS over time can help assess the investment potential of the company's shares. Care must be taken when comparing EPS from different firms as capital structures differ from one firm to the next. Price Earnings (P/E) R a t i o The price earnings ratio relates the market value of a share to the earnings per share.It is calculated a s follows: P/E Ratio = Market value per share Earnings per Share The P/E Ratio for Alexis is calculated as follows: Page 4 of 5 The ratio reveals that the capital value of the share is 9. 4 times higher than its current level of earnings. The ratio is essence is a measure of market confidence in the future of the company. A high P/E ratio means that relative to profits the price of the share is quite high. Why would this be the case? The higher the P/E ratio the greater the confidence in the future earning power of the company i. e. lthough current earnings are low investors expect them to increase in the future and therefore investors are prepared to pay a high price for the share in relation to the current earnings of the share. A low P/E ratio means that the share price is quite low compared to earnings – this implies a pessimistic view of the future. Nobody will be willing to pay a high price for a share in a company that has unexciting trading prospects. Because the P/E ratio gives a guide as to market confidence in a share it can therefore be helpful when comparing different companies although P/E ratios per sector will vary. Page 5 of 5

How to Get an A 15 Must-Ask Questions Before Finals

How to Get an A 15 Must-Ask Questions Before Finals Finals have always been your nightmare? Now they are almost here, and you can’t afford to show up unprepared. Even if you’ve been studying like crazy, the stress and busyness of finals week can make it a tricky time. And you want to be prepared for anything that can happen, right? You have to be informed about everything from the location and time of exam to the type of questions, so that you dont take it too serious or not serious enough. That’s why it’s important to ask these vital 15 questions. They’re guaranteed to keep you from feeling confused and caught on the hop on the big day. 1. Will it be an open-book test? You don’t want to waste your time memorizing facts that you can simply look up in your textbook. Still, using a book in the wrong course can get you an F for cheating. Ask this up front to save your skin. 2. Can we bring notes? Like with the book, it’s wise to know if you can use study aids on your final. Also, it’s good to know how many notes you can have (like one page or 35 card). That way, you can spend time writing enough to get all your info onto a paper that won’t get you in trouble. 3. Is it a paper or online final test? Especially in a hybrid or online course, it’s vital to know whether your final will be online or in print. Often, courses will have both, and you don’t want to miss an entire section just because you didn’t know about it. How much of the overall grade does it count for? At the beginning of the course, your professor probably went over how much the final is worth in regards to your overall grade. Ask the question again. Sometimes, the weight of a final will change depending on how the class is progressing. 5. How much of the test is based on the lecture material? If you are in a course where there is a huge lecture component, it’s good to know how much will be lecture-based and how much will be directly from the book. That way you can focus your study where it will be most effective. 6. What is the structure of the test? In addition to how much will be based on lecture, you need to know the structure of the final exam. Is it true/false? Multiple choice? Multiple-multiple choice? Will there be an essay component? Then, look up test strategies for that particular test structure. 7. Will there be some extra-credit questions? It’s always good to know how many extra points you can earn if you happen to screw up. Every little bit helps. 8. Are there alternative testing methods? If you are a student who has test anxiety, problems with comprehension, or any other documented testing issue, you need to advocate for yourself and ask for an alternative assignment. A good professor will have an option that will allow you to be successful no matter what your circumstances. 9. Will the final exam include a practical element? Some courses – like nursing, foreign language, or laboratory science – might have a practical element or lab component. Make sure you know that ahead of time so that you are prepared interact on test day. 10. How much time will we have for the test? It’s always good to know how much time and how many questions are on the test. That way, you can gauge your progress and track how long you spend on each section. It’s the best way to ensure you complete the whole thing. 11. Will there be a retest? Although some professors have a high-stakes mentality (â€Å"One strike, you’re out†), many professors have an option to retake the test if you do poorly. Know this ahead of time so that you can plan accordingly. If you feel that the first attempt wont be successful, dont panic and find out more ways on how to live through finals to improve your chance to get high scores. 12. How will the test be graded? Will your professor be grading on a curve? Will certain questions be given more weight than others? Try to get the grading rubric ahead of time so that you can make sure your answers (especially essay answers) meet all the criteria of an A+ final. 13. Is there a practice test available? Preparation is the name of the game. If there are practice questions or a full-on practice final you can take, get that information now. You’ll be able to see your weaknesses right away and really focus your studying on what you need to learn. 14. What supplies do I need to bring? Some professors will have all the supplies you need on the day of the test. Others may ask you to bring pencils, â€Å"little blue books,† or calculators. Take it from the pros – you don’t want to be the one student who shows up to the calculus final without a graphic calculator. 15. What are the rules for the test day? For every teacher and course, there will be slightly different variations. Some teachers have rules about the spacing of the desks. Others say it’s okay to work in teams to finish the final. Whatever the individual rules in your classroom, make sure you know them so that you don’t break them. Any questions? Go ahead, comment below!

Free Essays on Water Quality And Sanitation

Chemistry in Water Surface Water Quality Case Study Background Surface water is defined as run-off from rain and snow (precipitation) that flows on the earth’s surface in rivers and streams, and collects in lakes and reservoirs. Ground water collects in underground aquifers and springs after soaking into the ground and percolating through fissures. Overuse and contamination of both water sources is a major concern in the U.S. and around the world. Water quality can be compromised through overuse of the resource, resulting in changes in the ecosystems supported by these resources. Aquifers in the Western United States hold billions of gallons of water. These resources have been used in irrigation to bring millions of acres of otherwise unproductive farmland into production. As a result of these actions, major aquifers have been seriously depleted over the past thirty years. Since many aquifers are fed at a relatively slow rate, this water deficit may take hundreds of years to replace. In some geographic areas, the depletion of aquifers weakens surrounding rock structures that collapse and form sinkholes. Such consequences of the overuse of ground water are seldom observed, so much of the potential damage of this behavior go unnoticed. Links to resources on aquifers Artesian Aquifers, Kansas City Area Aquifer Protection The consequences of overusing surface water are usually much more evident. Streams are dammed to provide power, flood control and water for irrigation. This disrupts the natural ecosystems that have evolved around free flowing rivers. In the Northeast, the migrations of salmon stocks from the ocean in their freshwater breeding grounds have been disrupted, resulting in a dramatic drop in the population of this popular and beautiful species. River ecosystems rely on periodic floods to provide nutrients for plants that grow along riverbanks and for aquatic life that lives in the river delta. Two ... Free Essays on Water Quality And Sanitation Free Essays on Water Quality And Sanitation Chemistry in Water Surface Water Quality Case Study Background Surface water is defined as run-off from rain and snow (precipitation) that flows on the earth’s surface in rivers and streams, and collects in lakes and reservoirs. Ground water collects in underground aquifers and springs after soaking into the ground and percolating through fissures. Overuse and contamination of both water sources is a major concern in the U.S. and around the world. Water quality can be compromised through overuse of the resource, resulting in changes in the ecosystems supported by these resources. Aquifers in the Western United States hold billions of gallons of water. These resources have been used in irrigation to bring millions of acres of otherwise unproductive farmland into production. As a result of these actions, major aquifers have been seriously depleted over the past thirty years. Since many aquifers are fed at a relatively slow rate, this water deficit may take hundreds of years to replace. In some geographic areas, the depletion of aquifers weakens surrounding rock structures that collapse and form sinkholes. Such consequences of the overuse of ground water are seldom observed, so much of the potential damage of this behavior go unnoticed. Links to resources on aquifers Artesian Aquifers, Kansas City Area Aquifer Protection The consequences of overusing surface water are usually much more evident. Streams are dammed to provide power, flood control and water for irrigation. This disrupts the natural ecosystems that have evolved around free flowing rivers. In the Northeast, the migrations of salmon stocks from the ocean in their freshwater breeding grounds have been disrupted, resulting in a dramatic drop in the population of this popular and beautiful species. River ecosystems rely on periodic floods to provide nutrients for plants that grow along riverbanks and for aquatic life that lives in the river delta. Two ...

Church Experience Term Paper Example | Topics and Well Written Essays - 2000 words

Church Experience - Term Paper Example I conducted short interviews with twenty Christians in which I studies about Christianity from the people and asked them if they really practice these values in their daily lives. The response I received was tremendous. The people told me that how they practice these values in their daily lives and also that there is no place in Christianity for those who do not practice these values in their daily lives. They told me as how these values help them to lead a successful life. The examples given by them were eye opening. I will share one of the examples I received from a Christian in an interview. Once that Christian man went to his work just like he used to go daily. He saw people making conspiracies against him. He did nothing against them, rather kept doing his work honestly. His boss called him in the office and asked him about the conspiracies and rumors against him. The man said that it is all lies and there was no truth to them. The people making conspiracies against him liked hi s act so much that they started respecting him and protected and helped him at his problems. This was just a small example which really motivated me to study more about Christianity. Churches are considered to be an important factor in the practice of Christianity. According to my interviewed audience, church is not just a place where all the Christians gather and practice their religion. It is also a place where people meet, socialize and discuss all their problems with the people around. They try to help each other and find a solution for the problem people are facing. There are societies made inside the church to help people. For example the education society helps the students in their education field, the health society helps them in maintaining a healthy life, and the music society helps the people to make music their career and so on. People liked to change their religion and convert to Christianity because they felt the religion Christianity is a complete religion and there are no flaws in it. The religion is not just about religious practices but also about keeping all the Christians together, united. It is a complete guideline to a successful life. The best part about having to choose a church was that it was so welcoming that it was not particularly hard to gain access to people and their views. Just to be sure that there would be no problem; I did talk to the priest to make sure I was allowed to be there. His response was only welcoming and he didn’t even question my reasons for being there. His response was a mere that he was glad to have me there and that I was totally welcome to be part of the service. Whilst questioning people, I did introduce myself and briefed them about my project so that they knew what are conversation was about and were not at all misguided. The knowledge I gained was more ethic in nature because the behavior I observed in the church was not specific to any location. Upon questioning and interviewing people, I got the impression loud and clear that all church gatherings almost

DFS Presentation Assignment Case Study Example | Topics and Well Written Essays - 750 words

DFS Presentation Assignment - Case Study Example Increased competition, operative costs, overhead, and the need for augmented efficiency in operations make the need for DFS to adopt lean supply chain. DFS can make its supply chain agiler and lean through: †¢ Collaboration with suppliers and customers of DFS to get instant demand and supply information for efficient response to demand changes is one way of making DFS supply chain agile and lean †¢ Reducing all the processes and operations at DFS that have no added value to the consumer (Sople, 2011, 115) †¢ Reducing lead time for raw materials and components is the other manner of implementing lean supply chain (Sople, 2011, 115) †¢ Documenting all the supply chain processes and standardizing them will also allow DFS manage a lean and agile supply chain †¢ Collection of up to date information allows management to make supply decisions that efficiently and effectively meet demand †¢ Providing workers with information on high-quality requirement at the business will ensure more client satisfaction and meet the needs of an agile and lean supply chain for high-quality products †¢ Information can also guide DFS in setting up new distribution centers in areas near customer locations to allow for more responsiveness to changing consumer needs within a short period of time †¢ Use of the internet to easily receive and collect demand information and dispatch supplies to the consumers